Cartouche de filtre à débit élevé
Model Number: CRHFPP0402000NC
Filter accuracy : 20 μm
Frame : PP polypropylene
Structural material: : melt-blown fine PP polypropylene fiber filter membrane
Support film : PP polypropylene
Working temperature : 140℉
Large diameter of 6 inches/152mm, one end open, the filtering fluid flows from inside to outside, it can cause pollution by falling impurities after filtering
The deep folding structure and multi-layer filter membrane combination have higher filtration efficiency than traditional melt blown and wire wound filter elements. At the same time, the large diameter design of the filter element increases the effective filter area and can greatly extend the life of the filter element and reduce the number of filter elements. And reduce the size of the filter housing, saving costs
Suitable for filtration of various large-flow fluids: RO security filtration, seawater desalination filtration, cooling water filtration, chemical raw materials, beverages, biopharmaceuticals, solvents, water filtration
The filter element is produced, cleaned, tested and packaged in a clean room with a cleanliness of 10000.
It is recommended to replace the pressure difference: 30psid<2.1bar>
Caractéristiques du produit
1.High porosity and excellent permeability, less pressure loss, large flow
2. Grande capacité de polluants, haute précision de filtration, long cycle de remplacement
3. Bonne température et résistance à la corrosion, peut être utilisé sous la température maximale pendant longtemps, résistant à l'acide nitrique, à l'alcali, aux solvants organiques, à la corrosion pharmaceutique
4. Peut être cassé pour augmenter la zone de filtre, et le traitement de soudage
5. High strength, even if the liquid strong erosion, strong vibration, the fiber does not fall off.
Paramètres du produit
Modèle : | CRHFPP0402000NC |
Lieu d'origine : | Henan, Chine |
Nom de marque: | LVDA |
Durée de vie : | 6000- 8000h |
Certificat : | ISO 5011 |
Efficacité : | 0.95 |
Qualité : | Testé à 100% |
Application : | WATER FILTER |
Matériel de filtre: | polypropylene |
Oring Material: | Buna-N |
Length: | 1016mm |
Diameter: | 152.4mm |
Filter level: | 20um |
Structural material: | melt-blown fine PP polypropylene fiber filter membrane |
Support film | PP polypropylene |
Frame | PP polypropylene |
Filter accuracy | 20 μm |
Température de travail | 140℉ <60℃> |
Application du produit
1.Food and beverage industry
2.Seawater desalination treatment
3.Cooling water system
4.Industrial water
5.Reverse osmosis prefiltration
6.Process water and wastewater treatment
· Fabricant professionnel avec de nombreuses années d'expérience
· Bonne qualité avec prix compétitif
· OEM & ODM sont les bienvenus
· Divers éléments de paiement sont acceptables
· Bon service par un gestionnaire expérimenté