​Transformer oil purification filtration compact unit cart
​Transformer oil purification filtration compact unit cart
​Transformer oil purification filtration compact unit cart

​Transformer oil purification filtration compact unit cart

purificateur huile transformateur

Numéro de modèle:

Pression nominale (MPa): 0,6

Précision du filtre grossier (μm): 100

Température de travail (°C): 5-80

Voltage (V): AC 380V (triphase), 50Hz

Viscosité recommandée (cSt): 10~160

Get Quotation

Détails du produit

Transformer oil purification filtration compact unit cart

Our transformer oil purification filtration compact unit cart is designed for thermal vacuum drying and filtration of industrial oils used in lubrication, sealing, hydraulic control systems of gas turbine and gas pumping units, gas engine compressors, and in transformers. In addition to oil purification, transformer oil purification filtration compact unit cart may be used for heating and drying the oil-filled electrical devices.

Principle of operation: The oil driven by vacuum passes through a coarse filter with the filtration fineness of 200 microns after which it gets inside a vacuum tank where a heater is located. Rising from bottom to top, the oil heats up and gets into the other part of the chamber through a special channeled lid coming directly to special fillers. Next, the oil flows down the fillers, while the moisture vapor and gases are removed from the oil by vacuum. Then, the oil is pumped out from the tank bottom through two fine filters to the unit outlet. The filtration fineness of the filters can be selected at 5, 3, 1, or 0.3 microns.

Paramètres

Modèle AOP-B25

-*/**

A0P-B32

-*/**

A0P-B40

-*/**

A0P-B50

-*/**

A0P-B63

-*/**

A0P-B100

-*/**

A0P-B150

-*/**

Débit nominal (L / min) 25 32

40

50 63 100 150
Pression nominale (MPa) 0.6
Mpa (MPa) ≤0.02
Précision du filtre grossière (μm) 100
Classement de filtre de grade 1 (μm) 10、20、40
Classement de filtre de grade 2 (μm) 3、5、 10、S-W
Pression différentielle 0,2 Mpa
Température de travail (°C) 5-80

Viscosité recommandée (cSt)

10- 160

Voltage (V)

AC 380V (triphase), 50Hz
Puissance du moteur (kw) 0.55 0.75 1.1 1.1 1.5
2.2
3.0
Poids (kg) 46
78
90
96
102
120
160
Dimensions (mm) 520x350 x950
520 x350x950
720x 680 x 1020
720 x< 680 x 1020
 720 x 680x 1020
 720x 750x 1020
720x750x 122

Ce filtre à huile comprend une pompe à engrenages spéciale entraînée par un moteur. Il a les caractéristiques du son de champ bas, une forte capacité d'auto-amorçage et un fonctionnement stable.

La canalisation haute pression est équipée d'un dispositif de protection contre le débordement a. Il peut protéger efficacement la sécurité du système hydraulique.

Utilisez la protection du relais thermique pour éviter que le moteur ne soit endommagé en raison de la surcharge du moteur.

Le filtre grossier au port d'aspiration protège la pompe à huile et prolonge la durée de vie du filtre principal.

Il y a un filtre fin à deux étapes derrière la pompe pour permettre à l'huile d'atteindre rapidement un haut degré de propreté.

Différente précision pour le filtre fin peut être choisie en fonction des besoins dffrent des utilisateurs pour obtenir les résultats souhaités.

Le filtre primaire peut filtrer des particules et des impuretés plus grandes, et le filtre secondaire peut filtrer des particules fines ou de l'eau.

Le boîtier du filtre à huile adopte une structure d'ouverture rapide. Aucun outil spécial n'est nécessaire pour ouvrir rapidement le couvercle supérieur et remplacer l'élément fltre.

Le panneau est équipé d'un manomètre, qui indique en permanence l'état de fonctionnement du système et le degré de pollution de l'élément fltre pendant le travail.

Caractéristiques

Compactness;

Mobility;

Ease of control;

The heater is located inside the vacuum tank which made it possible to reduce the unit dimensions and to diminish the heat losses while heating the oil.

The oil is sucked into the vacuum chamber due to the underpressure generated by a two-stage vacuum system consisting of a backing pump and a booster pump. A new layout has been applied to the rest of the unit components. All of these innovations have given good results in terms of the small equipment size.

Applications

Used to purify industrial oils of various types: turbine oil, hydraulic oil, compressor oil, etc..

Laissez-nous un message
*Votre nom :
*Courriel :
*Téléphone :
Société :
Pays :
*Contenu :

Produits connexes