Insulating oil double-stage vacuum oil filter
Insulating oil double-stage vacuum oil filter
Insulating oil double-stage vacuum oil filter

Insulating oil double-stage vacuum oil filter

Autres unités de filtration d'huile

Numéro de modèle:

Working pressure(Mpa) : 0.6

Rated vacuum(Mpa) : ≤ - 0.095

Water content : 5 - 30

Air content : ≤0.2%

Filtration grossière (μm): 100

Get Quotation

Détails du produit

Insulating oil double-stage vacuum oil filter

The insulating oil two-stage vacuum oil purifier is used for the purification of insulating oil for power transmission and transformation equipment above 220k, and it is also suitable for the purification of insulating oil for other power transmission and transformation equipment and insulating oil for various electrical equipment. The two-stage vacuum unit improves the vacuum degree and pumping rate of the system, can get rid of the moisture and various gases in the transformer oil faster and deeper, improve the flash point and breakdown voltage value of the transformer oil, and shorten the maintenance of the transformer. and oil injection phase I. For new oil with breakdown voltage not lower than 25KV. One purification can be increased to 45KV, and several purifications can reach more than 70KV


Caractéristiques du produit

Unique multi level vacuum chamber design

Automated control system for ease of use and unattended operation

Intuitive display of vacuum, pressure, temperature and filter conditions

Easy access to all operating parameters

Built-in logging buffer for historical informaiton retrieval

Electronic flow meter with lifetime and user resettable displays

VFD pump drives

Oil level control including high and low oil level safety shutdown

Multi-stage foam control for optimal processing

TEFC motors

Oil pump with single mechanical seals

Low watt density heaters to aid in water removal

NEMA 12 control and power cabinets

Inlet and outlet filters for particulate removal

Booster / backer vacuum pump to ensure a deep consistent vacuum

Thermostatically controlled heater with selectable capacity

Heavy duty rigid steel construction for long lasting durability

Oil retentive skid design for spill containment


Paramètres du produit

 Model
AOP-1V-25
AOP-1V-32
AOP-1V-50
AOP-1V-100
AOP-1V-150
 AOP-1V-200
 Flow rate(L/min)
25
32
50
100
150
200
Working pressure(Mpa)


 0.6



Rated vacuum(Mpa)


≤ - 0.095



Water content


5 - 30



Air content


≤0.2%


Filtration grossière (μm)


100


Classement de filtre de grade 1 (μm)


10、20


Classement de filtre de grade 2 (μm)


3/5


Différentiels de pression


00.2Mpa


Voltage (V)


AC 380V (triphase), 50Hz


Puissance du moteur (kw)
1826366565135
 Weight(kg)
360
470
680
840
960
1500

Dimensions (mm)

12500x920x1600
1350x980x1600
1500x1060x1800
1600x1080x2100
1800x1200x2200
2000x1200x2200

Note: * -is filter's rating,such as 03 is 3 microns.

**-is the suitable medium, Omission:General hydraulic oil;BH:Water - glycol , V:Phosphonate 

hydraulic fluid

***- la viscosité moyenne est trop élevée ou la température de l'huile est basse, besoin d'ajouter le dispositif de chauffage.

****-explosion-proof type: add F before type, Omission: normal type


Applications de produits

It is suitable for on-site maintenance of transformers in large substations above 110KV and deep purification of high-grade new oil, imported oil, transformer oil, ultra-high voltage transformer oil and other oil products.

It is used for the maintenance and safe use of power systems and substations in power plants, power stations, power companies, substation industries, metallurgy, petrochemicals, machinery, transportation, railways and other industries. It can also be used for vacuum oiling, vacuum drying and hot oil circulation of transformers.

It is more advantageous to use this series of models in high altitude areas.

Laissez-nous un message
*Votre nom :
*Courriel :
*Téléphone :
Société :
Pays :
*Contenu :

Produits connexes